Rage 4WCP Replacement Components
2001274 2001274-YX
-
Cam Arm Pin & Set Screw Set (Captured)
$6.00Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes: Qty 1 - 5/16 x 2" Dowel 2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...$6.00 -
Bushing Set of 2 (enough for 1 arm) for Capture Pin Primary Using .570 Wide Cam Arm Weight
$18.00Bushings for capture pin style primary clutches with .570 wide cam arms weights These are sold 2 pieces = enough for 1 cam arm$18.00 -
AFP Style ATV / UTV STM Supertip Cam Arms
$325.00These are designed for the STM Rage 3VL 2016-2017 RZR XP-Turbo primary clutch. They have the capability adding 32 grams per arm for adjustment. This design allows the option of adding large quantity of weight to three different areas on both sides...$325.00 -
$6.00 -
STM Rage Primary Cam Arm Positioning Adjustment Set Screw Set
$13.00These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...$13.00 -
ATV Rage 4 & 8 Cover Screw Set
$8.00Rage 8 ATV primary cover screw set. Includes: 8 - ¼-20 x 3/4" BHCS$8.00 -
Supertip X Series Cam Arms for Yamaha
$324.00These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM Our fastener kit comes with the following hardware; Qty supplied per arm 2 - Tungsten Inserts - 7 grams 16 - Washers - 1 gram...$324.00 -
4 Arm Non-Fixed SuperTip Tuning Fastener Kit
$76.00NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits Fastener kit comes with the following hardware:Supplied per arm: 2 - 7 gram tungsten...$76.00 -
STM Rage 4 & 8 Spanner Tool
$92.00A heavy duty tool (also known as the grunt tool) that allows you to remove and install your spider. It will work on the primary clutch cover as well to hold it from turning while torquing the clutch bolt. This tool works on all STM Rage 4 & 8...$92.00 -
STM Rage ATV Primary Compression Tool for Polaris
$36.00This compression tool will allow you to change weights in your STM primary clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves. Thread...$36.00