Rage 4 Replacement Components
2001274 2001274-YX 2001297
2001192 2001137 2001257
-
$10.00 -
One ATV Primary Bearing (1001675) Clutch Thrust Washer (2 Required per clutch)
$13.00Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000$13.00 -
Movable Bushing & Retaining Clip
$12.00This bushing works with the sleeved bearing style ATV clutches and some 35mm snowmobile clutches and STM Primary Assembly Part# 1001603. Includes retaining clip.$12.00 -
Bushing Set of 2 (enough for 1 arm) for Capture Pin Primary Using .570 Wide Cam Arm Weight
$16.00Bushings for capture pin style primary clutches with .570 wide cam arms weights These are sold 2 pieces = enough for 1 cam arm$16.00 -
2-Way Bearing 47MM (replaces SKU: 1001000)
$52.00This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.$52.00 -
Cam Arm Pin & Set Screw Set (Captured)
$6.00Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes: Qty 1 - 5/16 x 2" Dowel 2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...$6.00 -
Cam Arm Pin Conversion 5/16" Fixed Pins for .470 Wide Weights (Set Screw Style Cam Arm Pins)
$30.00ONLY WORKS IN STM CLUTCHES **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms...$30.00 -
CP Series Clutch and HB Series Cam Arms
$81.00The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm...$81.00 -
$8.00 -
Cam Arm Pin 5/16" Fixed Pins (Set Screw Style Cam Arm Pin)
$7.00ONLY WORKS IN STM CLUTCHES Includes: 1 - 5/16 x 2 1/4" shoulder bolt with set screw dimple 1 - 1/4 - 20 Nyloc nut$7.00 -
XP-Turbo STM Clutch Puller for STM Primary 5/8-18 thread **READ Description**
$65.00This puller works on the Polaris XP-Turbo STM primary clutches only. Does not work on STM WCP Primary clutches (WCP clutches use the OEM puller or PCP8 puller on our site) **DOES NOT WORK ON STOCK XP-TURBO PRIMARY CLUTCH** Original part number...$65.00 -
Cam Arm Pin Conversion 5/16" Fixed Pins for .570 Wide Weights (Set Screw Style Cam Arm Pins)
$30.00ONLY WORKS IN STM CLUTCHES **Updated part # from 27ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .570 wide cam arms...$30.00